37
•If
÷
R is part of a series of multiple statements, only the
quotient will be transferred to the next operation.
Example: (2)
(10+2)
• The operation buttons
are disabled during display of the result of an operation
with calculation and display of remainder.
• If one of the following conditions is present when
performing an operation with calculation will be treated as
a normal division without calculation or display of
remainder.
A. When the dividend is greater than 1
✕
10
10
.
B. When the quotient is not a positive value or the
remainder is not an entire positive or a positive fraction.
Example:
is calculated as: -5 ÷ 2.
Example:
Fraction Simplification Function
• This function simplifies a fraction using the smallest
divisor. If necessary, you can also specify the divisor.
• This setting is valid in COMP mode only.
• This function is disabled if SIMP is set as AUTO in the
setup menu.
• Message:
A. "Fraction irreduc" display indicates that further
simplification is impossible.
B. "Non simplifiable" appears when the value you specify
is invalid as a divisor for simplification.
Example: Simplify by 3.
Example: Simplify (without specifying the divisor).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
