47
Deleting a Line
• (1) On the STAT editor screen, move the cursor to the line
you want to delete.
• (2) Press
.
Inserting Line
• (1) On the STAT editor screen, move the cursor to the line
that will be under the line you will insert.
• (2) Press
(STAT) (Edit).
• (3) Press
(Ins).
Important: Note that the insert operation will not work if the
maximum number of lines allowed for the STAT editor screen
are already used.
Deleting All STAT Editor Contents
(1) Press (STAT) (Edit).
(2) Press
(Del-A).
This clears all of the sample data on the STAT editor screen.
Note: You can perform the procedures under “Inserting a
Line” and “Deleting All STAT Editor Contents” only when the
STAT editor screen is on the display.
STAT Calculation Screen
The STAT calculation screen is for performing statistical
calculations with the data you input with the STAT editor
screen. Pressing the
key while the STAT editor screen is
displayed switches to the STAT calculation screen.
The STAT calculation screen also uses Linear format,
regardless of the current input/output format setting on the
calculator’s setup screen.
Using the STAT Menu
While the STAT editor or STAT calculation screen is on
display, press
(STAT) to display the STAT menu.
The content to the STAT menu depends on whether the
currently selected statistical operation type uses a single
variable or paired variables.
Single-variable Statistics Paired-variable Statistics
To Next Page
Loading...
Need help?
General
Weight and Dimensions
