5-35
Status Listings
OSA Errors
OSA Errors
Table 5-9. OSA Errors (1 of 2)
Error Number Error Description [description/explanation/examples]
20001 desc = “Error detected in ADC sub-system”
help = “An error has been detected in the Analog-to-Digital converter
subsystem. Please record the hexadecimal number listed with the error and
cycle power. If the error persists, contact the nearest Hewlett-Packard
Instrument support center for assistance. In the U.S., call (800) 403-0801. See
the HP 86140 series Users Guide for a listing of the HP sales and service
offices.”
20002 desc = “Error detected in slit positioning system”
help = “An error has been detected in the motor which controls the resolution
bandwidth slit wheel. Please record the hexadecimal number listed with the
error and cycle power. If the error persists, contact the nearest Hewlett-Packard
Instrument support center for assistance. In the U.S., call (800) 403- 0801. See
the HP 86140 series Users Guide for a listing of the HP sales and service
offices.”
20003 desc = “Error detected in grating positioning system”
help = “An error has been detected in the motor which controls the diffraction
grating. Please record the hexadecimal number listed with the error and cycle
power. If the error persists, contact the nearest Hewlett-Packard Instrument
support center for assistance. In the U.S., call (800) 403-0801. See the HP 86140
series Users Guide for a listing of the HP sales and service offices.”
20004 desc = “Monochromator calibration data is invalid”
help = “Factory calibration data for the monochromator is invalid. Please record
the hexadecimal number listed with the error and cycle power. If the error
persists, contact the nearest Hewlett-Packard Instrument support center for
assistance. In the U.S., call (800) 403-0801. See the HP 86140 series Users
Guide for a listing of the HP sales and service offices.”
book.book Page 35 Monday, January 31, 2000 10:34 AM
To Next Page
Loading...
Need help?
General
