HP 86140A Series User Manual

3-48
Using the Optical Spectrum Analyzer
The System Menus
To display the Active Function Area
1
Press the front-panel
System
key.
2
Press the
More System Functions....
softkey.
3
Press the
Active Panel
softkey to toggle the display of the Active Function Area
ON
or
OFF
.
To change the time and date
NOTE
Changing the time, date, or time zone causes the instrument to reboot.
1
Press the front-panel
System
key.
2
Press the
More System Functions....
softkey.
3
Press the
Set Time/Date....
softkey. The Time/Date Setup panel appears.
4
Use the navigation keys to set the date, time and time zone that are correct for
your location.
5
Press the
Set Time/Date
softkey when you are satisfied with your selections.
To select the power-on state
1
Press the front-panel
System
key.
2
Press the
More System Functions....
softkey.
3
Press the
Service Menu....
softkey.
4
Press the
Power On State
softkey. Toggle to select IP or Last.
book.book Page 48 Monday, January 31, 2000 10:34 AM

HP 86140A Series Specifications

General

Brand	HP
Model	86140A Series
Category	Measuring Instruments
Language	English