HP b2600 Upgrade Instructions

Upgrading Your System
Bezel Labels
3. Remove the bezel label. See Figure 2-2.
Figure 2-2 Removing the Current Bezel Label
Bezel Label
Bezel Rivet Hole
Attaching the New Bezel Labels
After completing the procedure in the section “Removing the Current Bezel Label,” you are ready to attach
two labels to your workstation’s bezel. These labels were shipped with your upgrade kit.
To attach these labels to your workstation’s bezel, follow these steps:
1. Insert the rivets of the bezel label with the HP logo on it into the rivet holes at the top of the bezel. See
Figure 2-3.
Figure 2-3 Attaching the Top Bezel Label
Bezel Label
10
Chapter 2

HP b2600 Specifications

General

Brand	HP
Model	b2600
Category	Desktop
Language	English