EasyManuals Logo
Home>HP>Desktop>Compaq 6000 Pro

HP Compaq 6000 Pro User Manual

HP Compaq 6000 Pro
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
A POST Error Messages
This appendix lists the error codes, error messages, and the various indicator light and audible
sequences that you may encounter during Power-On Self-Test (POST) or computer restart, the probable
source of the problem, and steps you can take to resolve the error condition.
POST Message Disabled suppresses most system messages during POST, such as memory count and
non-error text messages. If a POST error occurs, the screen will display the error message. To manually
switch to the POST Messages Enabled mode during POST, press any key (except F10, F11, or F12).
The default mode is POST Message Disabled.
The speed at which the computer loads the operating system and the extent to which it is tested are
determined by the POST mode selection.
Quick Boot is a fast startup process that does not run all of the system level tests, such as the memory
test. Full Boot runs all of the ROM-based system tests and takes longer to complete.
Full Boot may also be enabled to run every 1 to 30 days on a regularly scheduled basis. To establish
the schedule, reconfigure the computer to the Full Boot Every x Days mode, using Computer Setup.
98 Appendix A POST Error Messages

Table of Contents

Other manuals for HP Compaq 6000 Pro

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq 6000 Pro and is the answer not in the manual?

HP Compaq 6000 Pro Specifications

General IconGeneral
Tcase72.4 °C
Bus typeFSB
SteppingC0
Processor cache6 MB
Processor cores2
Processor modelE8500
Processor familyIntel® Core™2 Duo
Processor seriesIntel Core 2 Duo E8000 Series
Processor socketLGA 775 (Socket T)
Processor codenameWolfdale
Processing Die size107 mm²
Processor frequency3.16 GHz
Processor cache typeL2
Processor lithography45 nm
Processor system typeDP
Processor manufacturerIntel
Processor front side bus1333 MHz
Processor operating modes64-bit
ECC supported by processorNo
Thermal Design Power (TDP)65 W
Processor core voltage (AC)0.850/1.3625 V
Number of processors installed1
CPU multiplier (bus/core ratio)9.5
Number of Processing Die Transistors410 M
PlatformPC
LightScribeYes
Power supply typeAC/DC
Security featuresTPM 1.2
External drive bays2 x 5.25\
Internal drive bays2 x 3.5\
Networking featuresGigabit Ethernet
Compliance industry standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Audio systemRealtek ALC261
Motherboard chipsetIntel® Q43
Audio output channels2.0 channels
Memory slots4x DIMM
Internal memory4 GB
Internal memory typeDDR3-SDRAM
Maximum internal memory16 GB
Memory layout (slots x size)2 x 2 GB
HDD size3.5 \
HDD speed7200 RPM
HDD interfaceSATA
Optical drive typeDVD-RW
Total storage capacity500 GB
Discrete graphics card modelNot available
On-board graphics card modelIntel® GMA 4500
On-board graphics card familyIntel® GMA
Operating system installedWindows 7 Professional
USB 2.0 ports quantity10
Firewire (IEEE 1394) ports0
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Chassis typeMicro Tower
Product colorBlack
Country of originChina
Cable lock slot typeKensington
Number of 3.5\" bays3
Power supply320 W
Processor codeSLAPK
Processor ARK ID33911
Processor package size37.5 x 37.5 mm
Weight and Dimensions IconWeight and Dimensions
Depth430 mm
Width176 mm
Height377 mm
Weight9300 g

Related product manuals