6-62
RADIUS Authentication, Authorization, and Accounting
Viewing RADIUS Statistics
Viewing RADIUS Statistics
General RADIUS Statistics
Figure 6-25. Example of General RADIUS Information from Show Radius Command
Syntax: show radius [host < ip-addr >]
Shows general RADIUS configuration, including the server
IP addresses. Optional form shows data for a specific
RADIUS host. To use show radius, the server’s IP address must
be configured in the switch, which. requires prior use of the
radius-server host command. (See “Accounting Services” on
page 6-48.)
HP Switch# show radius
Status and Counters - General RADIUS Information
Deadtime(min) : 5
Timeout(secs) : 10
Retransmit Attempts : 2
Global Encryption Key : myg10balkey
Dynamic Authorization UDP Port : 3799
Source IP Selection : Outgoing Interface
Auth Acct DM/ Time
Server IP Addr Port Port CoA Window Encryption Key OOBM
--------------- ---- ---- --- ------ -------------------------------- -----
192.33.12.65 1812 1813 No 300 my65key No
To Next Page
Loading...
Need help?
General