HP E3800 Series User Manual

8-24
Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Figure 8-12. SSH Configuration and Client-Public-Key Listing From Figure 8-11
6. Use an SSH Client To Access the Switch
Test the SSH configuration on the switch to ensure that you have achieved the
level of SSH operation you want for the switch. If you have problems, refer to
"RADIUS-Related Problems" in the Troubleshooting chapter of the Manage-
ment and Configuration Guide for your switch.
HP Switch(config)# show authentication
Status and Counters - Authentication Information
Login Attempts : 2
Respect Privilege : Disabled
| Login Login Login
Access Task | Primary Server Group Secondary
----------- + ---------- ------------ ----------
Console | Local None
Telnet | Local None
Port-Access | Local Authorized
Webui | Local None
SSH | PublicKey None
Web-Auth | ChapRadius radius Authorized
MAC-Auth | ChapRadius radius None
| Enable Enable Enable
Access Task | Primary Server Group Secondary
----------- + ---------- ------------ ----------
Console | Local None
Telnet | Local None
Webui | Local None
SSH | Tacacs Local
HP Switch(config)# show crypto client-public-key
0,”Maden name [1024-bit rsa, Local_cryto @ Local crypto, Thu Nov 07 2009
21:25:42]” ssh-rsa
AAAAB3NzaClyc2EAAAADAQABAAAAgQcz9oNfqxMHUFEC6frSu1Sa4Uh1EFznFhQqmgP2
9HXYp6NR/1QOumACtrFU+QD11Etm/XvZH/
KIxTdEc5exFZXKIxTdEc5exFXS10tcRaFYxI9UjK80dBMavBGKBLvVebCVwlqdAqbkaEX3d/
WaPS2xArLCFHsTZhnCvqTZDOGAB1frlcw==1,”[768-bit rsa, Local_crypto@Localcrypto,
Mon Dec 16 2009 23:01:51]”ssh-rsaAAAAb3NzaClyc2EAAAADQABAAAAYQD0tmzA32JBgeu
FJN0iXI3bfooPKZ09JKCcpQcXEVK7N+eKf9M0XvnmfFuEpw/fpqhlvsE66n8FDu7W/B2tKH/tqQ
Lists the current SSH
authentication
configuration.
Client Key Index Number
Shows the contents of
the public key file
downloaded with the
copy tftp command in
figure 8-11. In this
example, the file
contains two client
public-keys.

HP E3800 Series Specifications

General

Brand	HP
Model	E3800 Series
Category	Switch
Language	English