15-5
Using Authorized IP Managers
Defining Authorized Management Stations
rized Manager IP address to authorize four IP addresses for management
station access. The details on how to use IP masks are provided under
“Building IP Masks” on page 15-11.
Note The IP Mask is a method for recognizing whether a given IP address is
authorized for management access to the switch. This mask serves a different
purpose than IP subnet masks and is applied in a different manner.
Menu: Viewing and Configuring IP Authorized
Managers
Only IPv4 is supported when using the menu to set the management access
method.
From the console Main Menu, select:
2. Switch Configuration …
6. IP Authorized Managers
Figure 15-1. Example of How to Add an Authorized Manager Entry
HP Switch 22-Apr-2008 20:17:53
==========================- CONSOLE - MANAGER MODE -============================
Switch Configuration - IP Managers
Authorized Manager IP IP Mask Access Level Access Method
---------------------- ---------------------- ------------ -------------
10.10.240.2 255.255.255.255 Manager all
10.10.245.3 255.255.255.255 Operator ssh
10.10.246.200 255.255.255.255 Operator tftp
10.10.245.30 255.255.255.0 Operator ssh
Actions-> Back Add Edit Delete Help
1. Select Add to add an authorized manager
to the list.
To Next Page
Loading...
Need help?
General