HP Elite Folio User Manual

6. Remove the speakers from the computer (6).
Reverse this procedure to install the speakers.
NOTE: When installing the speakers, be sure rubber grommets are installed in the screw holes in the
speakers.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 6-3 Touchpad description and part number
Description Spare part number
Touchpad M35286-001
Touchpad cable (included in Cable Kit) M35257-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 28).
2. Remove the pen (see Pen on page 28).
3. Remove the bottom cover (see Bottom cover on page 30).
4. Remove the battery (see Battery on page 31).
Remove the touchpad:
1. Disconnect the touchpad cable from the touchpad ZIF connector (1).
2. Gently pull up to release the keyboard cable from the adhesive that secures it to the top of the touchpad
(2).
NOTE: To prevent damage to the cable, be careful not to use too much force when releasing the
keyboard cable.
34 Chapter 6 Removal and replacement procedures for authorized service provider parts

HP Elite Folio Specifications

General

Brand	HP
Model	Elite Folio
Category	Laptop
Language	English