ENWW Using the Embedded Web Server 122
Other Settings
This item provides access to a variety of management and printing
configuration options. The following tabs are provided:
● Misc. Settings: for enabling miscellaneous advanced protocols
and functions
● Firmware Upgrade: to update your HP Jetdirect print server
with new features and enhancements (model ew2400 upgrade
features are limited and require a wired network connection)
● LPD Queues: for setting up print queues used in printing under
LPD (line printer daemon) printing services
● USB Settings: (external print servers only) to configure
Universal Serial Bus connection parameters
● Support Info: to set up the Support link located under Other
Links in the left margin
● Refresh Rate: to set the time interval (in seconds) for embedded
Web diagnostic page updates
Disable SNMPv1/v2 This option disables the SNMP v1/v2c agents on the print
server, which is recommended for secure environments. If
SNMP v1/v2c is disabled, some port monitors or discovery
utilities may not operate properly.
Enable SNMPv3 (Full-featured HP Jetdirect print servers only) This option
enables (check) or disables (clear) the SNMP v3 agent on
the print server.
When enabled, an SNMP v3 account must be created on
the print server, and the account information must be
implemented on the SNMP v3 management application.
You may create an account by providing the following
information:
User Name: the SNMP v3 account user name.
Authentication Key: a 16-byte hexadecimal value for
authenticating the SNMP packet contents using the
Message Digest Algorithm 5 (MD5, RFC 1321).
Privacy Key: a 16-byte hexadecimal value for encrypting
the data portion of the SNMP packet using the Data
Encryption Standard (DES) algorithm.
Context Name: the view context in which this user can
access SNMP objects. It is always “Jetdirect”.
Table 4.7 SNMP Settings (2 of 2)
Item Description
To Next Page
Loading...
Need help?
General
