HP Ew2400 - JetDirect Print Server User Manual

ENWW Troubleshooting the HP Jetdirect Print Server 196
Troubleshooting Wireless Print
Servers
Unable to Communicate During Initial Setup
If you are using wireless communications to set up the print server,
verify the following:
● Your wireless computer is configured to match the default
wireless network settings on the HP Jetdirect print server:
■ Communication Mode: Ad Hoc
■ Network Name (SSID): hpsetup
■ Encryption (WEP): <Disabled>
Note The Network Name (SSID) is case-sensitive. Be
sure to specify “hpsetup” using lowercase
characters.
● The HP Jetdirect print server is turned on and operating properly
(print a Jetdirect configuration page).
● You are within range of the HP Jetdirect print server.
● There are fewer than six devices total on the Ad Hoc network
(with SSID “hpsetup”).
● There is no Access Point in the vicinity that is configured with
an SSID of “hpsetup”.
● Multiple print servers are not being configured at the same time.
If there are multiple print servers, turn all off except the one you
want to configure.

HP Ew2400 - JetDirect Print Server Specifications

General

Brand	HP
Model	Ew2400 - JetDirect Print Server
Category	Print Server
Language	English