38
Item
HPE 5140 24G
4SFP+ EI
HPE 5140 48G
4SFP+ EI
HPE 5140 24G
2SFP+ 2XGT EI
HPE 5140 8G
2SFP 2GT
compliance
Melting
current of
power
supply fuse
2 A/250 V 3.15 A/250 V 2 A/250 V 2 A/250 V
Cooling
system
Using fixed fan trays
to draw ambient air in
from the left side, right
side, and port side of
the chassis and
exhaust heated air
out from the power
supply side.
Using fixed fan trays
to draw ambient air
in from the left side
and exhaust heated
air out from the right
side and power
supply side.
Using fixed fan trays
to draw ambient air
in from the chassis
left side and exhaust
heated air from the
chassis right side.
Natural cooling
without fan trays
Operating
temperature
–5°C to +45°C (23°F to 113°F)
Operating
humidity
5% to 95%, noncondensing
Fire
resistance
compliance
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
Table 13 Technical specifications for non-PoE switch models (2)
HPE 5140 24G SFP w/8G Combo 4SFP+ EI
Dimensions (H × W × D) 43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in)
Weight ≤ 6 kg (13.23 lb)
Console port
• 1 × serial console port
• 1 × micro USB console port
When both ports are connected, only the micro USB console port is available.
10/100/1000BASE-T
autosensing Ethernet
port
8 (Each and its corresponding SFP port form a combo interface.)
SFP port
24 (The eight highest-numbered SFP ports form combo interfaces with their
corresponding 10/100/1000BASE-T autosensing Ethernet ports, respectively.)
SFP+ port 4
Power supply slot 2, at the rear panel
Input voltage
PSR150-A1:
• Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
PSR150-D1:
• Rated voltage: –48 VDC to –60 VDC
• Max voltage: –36 VDC to –72 VDC
DC power source for the PSR150-D1 power supply: –48 VDC power source in
the equipment room or an RPS ( RPS800-A or RPS1600-A)
Minimum power
consumption
• 1 × PSR150-A1: 18 W
• 1 × PSR150-D1: 18 W
To Next Page
Loading...
Need help?
General