HP FlexNetwork 5140 EI Series User Manual

51
10/5/2.5/1GBASE-T autosensing Ethernet port
The HPE 5140 24G PoE+ 2SFP+ 2XGT EI, HPE 5140 24G 2SFP+ 2XGT EI and HPE 5140 48G
PoE+ 2SFP+ 2XGT EI switches provide 10/5/2.5/1GBASE-T autosensing Ethernet ports.
Table 20 10/5/2.5/1GBASE-T autosensing Ethernet port specifications
Item
Specification
Connector type RJ-45
Transmission rate, duplex mode, and
auto MDI/MDI-X
• 10 Gbps, full duplex
• 5 Gbps, full duplex
• 2.5 Gbps, full duplex
• 1 Gbps, full duplex
• MDI/MDI-X autosensing
Max transmission distance
• 10G mode:
 100 m (328.08 ft) over Category-6 shielded twisted pair or
above twisted pair
 60 m (196.85 ft) over Category-5e twisted pair or
Category-6 unshielded twisted pair
• 5G mode: 100 m (328.08 ft) over Category-5e or above
twisted pair
• 2.5G mode: 200 m (656.17 ft) over Category-5e or above
twisted pair
• 1G mode: 200 m (656.17 ft) over Category-5e or above
twisted pair
Transmission medium Category-6 (or above) twisted pair cable
Compatible standards
• IEEE 802.3ab
• IEEE 802.3an
SFP port
Some HPE 5140 EI switch models provide SFP ports. Table 21 describes the SFP port support for
the SFP transceiver modules and cables.
Table 21 SFP port support for SFP transceiver modules and cables
Model
SFP port support for SFP
transceiver modules and
cables
Restrictions
HPE 5140 24G 4SFP+ EI
HPE 5140 48G 4SFP+ EI
HPE 5140 48G PoE+ 4SFP+ EI
HPE 5140 24G PoE+ 2SFP+
2XGT EI
HPE 5140 48G PoE+ 2SFP+
2XGT EI
HPE 5140 24G 2SFP+ 2XGT EI
No SFP ports N/A
HPE 5140 8G 2SFP 2GT Combo
EI
• SFP ports 9 and 10: GE
SFP transceiver module
and cables in Table 22 and
FE SFP transceiver
modules in Table 23
To use GE transceiver modules
with a maximum transmission
distance greater than or equal to 80
km (49.71 miles), make sure the
ambient temperature does not

HP FlexNetwork 5140 EI Series Specifications

General

Brand	HP
Model	FlexNetwork 5140 EI Series
Category	Switch
Language	English