55
Table 25 10-GE SFP+ cables available for the SFP+ ports
Max transmission distance
JD095C HP X240 10G SFP+ SFP+ 0.65m DA Cable 0.65 m (2.13 ft)
JD096C HP X240 10G SFP+ SFP+ 1.2m DA Cable 1.2 m (3.94 ft)
JD097C HP X240 10G SFP+ SFP+ 3m DA Cable 3 m (9.84 ft)
JG081C HP X240 10G SFP+ SFP+ 5m DA Cable 5 m (16.40 ft)
Figure 56 10-GE SFP+ cable
As a best practice, use HPE SFP/SFP+ transceiver modules or SFP+ cables for the SFP+ ports
The HPE SFP/SFP+ transceiver modules and SFP+ cables available for the SFP+ ports are
subject to change over time. For the most up-to-date list of HPE SFP/SFP+ transceiver modules
and SFP+ cables available for the SFP+ ports, contact your HPE sales representative or
technical support engineer.
For the specifications for the HPE SFP/SFP+ transceiver modules and SFP+ cables, see HPE
Transceiver Modules User Guide.
Combo interface
The HPE 5140 24G PoE+ 4SFP+ EI switches provide four combo interfaces. The HPE 5140 8G
2SFP 2GT Combo EI switches provide two combo interfaces. The HPE 5140 24G SFP w/8G Combo
4SFP+ EI switches provide eight combo interfaces. Each combo interface contains an SFP port and
a 10/100/1000BASE-T autosensing Ethernet port. Only one of these two ports operates at a time.
LEDs
System status LED
The system status LED shows the operating status of the switch.
To Next Page
Loading...
Need help?
General