1
0.
To change available synchronization settings, select the type of
information and tap Settings.
1
1.
Tap Finish.
You can set up your HP iPAQ to synchronize with Exchange Server over a
wireless network or through a cable or Bluetooth connection to a personal
computer. You must have the following information to sync wirelessly: server
name, user name, password, and domain name.
NOTE Synchronizing directly with Exchange Server is supported
only on Windows Mobile-powered Pocket PC 2002 or later.
By clicking Tools > Options, you can determine whether an
information type is synchronized with a personal computer or with
Exchange Server.
Setting up a POP3, HTTP, or IMAP4 E-mail Account
To send and receive mail, you need to set up an e-mail account with an
Internet Service Provider (ISP) or have an account that you access using a
virtual private network (VPN) server connection (typically a work account).
Be sure you have the proper plan with your wireless service provider and
your connections have been set up correctly.
To set up an e-mail account on your HP iPAQ:
1. Tap Start > Messaging.
2. Tap Menu > Tools > New Account.
3. Enter your e-mail address, and tap Next.
Auto configuration attempts to download necessary e-mail server
settings so that you do not need to enter them manually.
4. Once Auto configuration has finished, tap Next.
5. Enter your name (the name you want displayed when you send e-mail)
and your password.
ENWW
Mobile Office
39
To Next Page
Loading...
Need help?
General