Protecting Your Investment
Protecting the HP iPAQ Screen from Cracking or Damage
CAUTION The screen of your HP iPAQ is made of glass and can
be damaged or broken by drops, impacts, or pressure.
To reduce the risk of damage to the internal components, do not
spray liquid directly on the screen, or allow excess liquid to drip inside
your HP iPAQ. Using soap or other cleaning products on the screen
might discolor the finish and damage it.
●
You should observe the following practices to protect the screen of your
HP iPAQ from damage:
●
Do not sit on your HP iPAQ.
●
When transporting your HP iPAQ in a purse, pocket, briefcase, etc.,
ensure the device does not get compressed, bent, dropped, or hit.
●
When not in use, close the cover (if one is available) on your HP
iPAQ and store it in a case. You can select from a wide variety of
case options at
www.hp.com/accessories/ipaq or
www.casesonline.com.
●
Do not place anything on top of your HP iPAQ.
●
Do not bang your HP iPAQ against hard objects.
●
Never use any device other than the stylus that comes with the HP iPAQ
or an approved replacement to tap or write on the screen. If you lose or
break your stylus, you can order extras at
www.hp.com/accessories/
ipaq.
●
Clean your HP iPAQ by wiping the screen and the exterior with a soft,
damp cloth lightly moistened only with water.
ENWW
Protecting Your Investment
47
To Next Page
Loading...
Need help?
General