HP J8697A User Manual

3-15
Virus Throttling (Connection-Rate Filtering)
Configuring Connection-Rate Filtering
To view the complete connection-rate configuration, including any ACLs
(page 3-18), use show config (for the startup-config file) or show running (for
the running-config file). For example:
Figure 3-5. Example of Connection-Rate Filtering Configuration in the Startup-
Config File
HP Switch(config)# show config
Startup configuration
; J8697A Configuration Editor; Created on
hostname “HP Switch”
connection-rate-filter sensitivity medium
ip access-list connection-rate-filter “Sample”
filter ip 13.28.234.180 0.0.15.255
ignore ip 0.0.0.0 255.255.255.255
exit
module 2 type J8161A
module 4 type J8161A
ip routing
logging 13.28.234.180
snmp-server community “public” Unrestricted
vlan 1
name “DEFAULT_VLAN”
untagged B1-B12, B19-B24, D1-D24
no ip address
no untagged B13-B18
ip proxy-arp
exit
vlan 15
name “VLAN_15”
untagged B13-B18
ip address 13.28.234.181 255.255.240.0
ip proxy-arp
ip connection-rate-filter-access-group “Sample”
exit
filter connection-rate B13 notify-only
filter connection-rate B14 throttle
filter connection-rate B16-B16 block
Example of per-port connection-rate
filtering policies appearing in the
configuration.
Example of a connection-rate
filtering ACL appearing in a
VLAN configuration.
Example of a connection-rate
filtering ACL appearing in the
configuration.
Entry showing that
connection-rate-
filtering is enabled
and set to “medium”
sensitivity.

HP J8697A Specifications

General

Brand	HP
Model	J8697A
Category	Switch
Language	English