4-55
Web and MAC Authentication
Configuring MAC Authentication on the Switch
Figure 4-32. Example of Output showing the Custom Access Denied Message
The example in Figure 4-33 shows the text of the Access Denied Message when
the radius-response option is configured.
Figure 4-33. Example of Access Denied Message when radius-response is Configured
HP Switch(config)# show port-access web-based config
Port Access Web-based Configuration
DHCP Base Address : 192.168.0.0
DHCP Subnet Mask : 255.255.248.0
DHCP Lease Length : 10 seconds
Allow RADIUS-assigned dynamic (GVRP) VLANs[No]: Yes
Access Denied Message : Custom:
Please contact your system administrator to obtain authentication privileges.
| Client Client Logoff Re-auth Unauth Auth Ctrl
Port | Enabled Limit Moves Period Period VLAN ID VLAN ID Dir
---- + ------- ------- ------- --------- --------- ------- ------- -----
A1 | Yes 1 No 300 60 1 2 both
A2 | Yes 18 No 999999999 999999999 0 0 both
A3 | Yes 22 No 999999999 999999999 4096 4096 both
HP Switch(config)# show port-access web-based config
Port Access Web-based Configuration
DHCP Base Address : 192.168.0.0
DHCP Subnet Mask : 255.255.248.0
DHCP Lease Length : 10 seconds
Allow RADIUS-assigned dynamic (GVRP) VLANs[No]: Yes
Access Denied Message : Retrieved from Radius
| Client Client Logoff Re-auth Unauth Auth Ctrl
Port | Enabled Limit Moves Period Period VLAN ID VLAN ID Dir
---- + ------- ------- ------- --------- --------- ------- ------- -----
A1 | Yes 1 No 300 60 1 2 both
A2 | Yes 18 No 300 999999999 0 0 both
A3 | Yes 22 No 300 999999999 4096 4096 both
To Next Page
Loading...
Need help?
General
