1-6
Switch overview
Switch features
Switch features
The features of the HP PS1810 Switches include:
■ Plug-and-play networking—all ports are enabled, just connect the network
cables to active network devices and your switched network is operational.
■ Auto-MDIX on all twisted-pair ports—all connections can be made using
straight-through twisted-pair cables. Cross-over cable is not required, although
it works.
■ Support for IEEE 802.3az Energy Efficient Ethernet (EEE) features that reduce
power consumption when connected with EEE-compliant devices.
■ Support for automatic discovery and health status reporting of HP ProLiant Gen8
Servers.
■ Automatically negotiated full-duplex operation for all 10/100/1000BASE-T RJ-
45 ports when connected to other auto-negotiating devices.
■ Easy management of the switch through several available interfaces:
• Switch-web interface —an easy-to-use built-in graphical interface that can
be accessed from common Web browsers.
• HP Intelligent Management Center (IMC) — allows network administrators
to discover and map the switches within their network and launch the built-
in graphical interface from within IMC to configure the switches.
■ Support for up to 4 trunks for the PS1810-8G and up to 12 trunks for the PS
1810-24G so that you can assign physical links to one logical link (trunk) that
functions as a single, higher-speed link providing dramatically increased
bandwidth. Also known as Link Aggregation.
■ Support for up to 64 IEEE 802.1Q-compliant VLANs so you can divide the
attached end nodes into logical groups that fit your business needs.
■ Support for many advanced features to enhance network performance—for a
description, see the PS1810 Switch Management and Configuration Guide.
■ Support for downloading new switch software for product enhancements and
bug fixes.
To Next Page
Loading...
Need help?
General
