2–8 Troubleshooting
Problems and Solutions
Hibernation cannot be initiated
■ Make sure Hibernation is enabled. To enable Hibernation:
❏ In Windows 2000 Professional, select Start > Settings > Control
Panel. Double-click Power Options, select the Hibernate tab,
then select the Enable Hibernate Support check box.
❏ In Windows XP, select Start > Control Panel > Performance and
Maintenance > Power Options icon. Select the Hibernate tab,
then select the Enable Hibernate Support check box.
■ Make sure the Hibernation timeouts are not set to Never. To access
the Hibernation timeout settings:
❏ In Windows 2000 Professional, select Start > Settings > Control
Panel. Double-click Power Options, then select the Power
Schemes tab.
❏ In Windows XP, select Start > Control Panel > Performance and
Maintenance icon > Power Schemes tab.
■ Review the information in your model-specific documentation
regarding:
❏ How drive media, such as diskettes, CDs, or DVDs, affect
Hibernation.
❏ How infrared affects Hibernation.
320399-002.book Page 8 Thursday, June 19, 2003 1:17 PM
To Next Page
Loading...
Need help?
General