2. Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated.
You will hear a sound when the device has been detected, and a menu of available options may
be displayed.
NOTE: The first time you insert an ExpressCard, a message is displayed in the notification
area to let you know the card is recognized by the computer.
NOTE: An inserted ExpressCard uses power even when idle. To conserve power, stop or remove
an ExpressCard when it is not in use.
Removing an ExpressCard
CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to
safely remove the ExpressCard.
To remove an ExpressCard, follow these steps:
1. Save your information and close all programs associated with the ExpressCard.
2. Release and remove the ExpressCard:
a. Gently press in on the ExpressCard (1) to unlock it.
b. Pull the ExpressCard out of the slot (2).
58 Chapter 13 Using ExpressCards
To Next Page
Loading...
Need help?
General