CLI commands
Virtual AP context
2-71
end
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
end
Switches to parent context.
security
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
security (none | wep | 802.1X [wep] | wpa (psk | radius) [ v1 | v2 ] )
Sets the current wireless security policy.
Parameters
none No wireless security.
wep This option enables support for wireless users with WEP client software.
802.1X This option enables support for wireless users with 802.1X client software.
The controller supports 802.1X client software that uses EAP-TLS, EAP-
TTLS, EAP-SIM, and PEAP.
wep Enables the use of dynamic WEP keys for all 802.1X sessions. Dynamic key
rotation occurs on key 1, which is the broadcast key. Key 0 is the pairwise
key. It is automatically generated by the controller.
wpa This option enables support for wireless users with WPA client software.
psk Enables support for a preshared key:
radius The controller obtains the MPPE key from the RADIUS server. This is a
dynamic key that changes each time the user logs in and is authenticated.
The MPPE key is used to generate the TKIP keys that encrypt the wireless
data stream.
v1,v2 Specify which version of WPA to use. None will use both versions (mixed
mode).
To Next Page
Loading...
Need help?
General
