CLI commands
Virtual AP context
2-67
mac authentication radius stationid delimiter
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac authentication radius stationid delimiter (null | colon | dash | dot | space
| comma | under)
Specifies the one-character delimiter that will be used to format both the calling station ID and the
called station ID attributes in RADIUS packets.
mac authentication
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac authentication
Enables support for MAC-based authentication.
no mac authentication
Disable support for MAC-based authentication.
add ip filter
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
add ip filter <ip address>/<mask>
Adds an IP filter to the list of destination addresses that traffic will be accepted for. All other
traffic will be blocked.
If the list is empty, then all wireless-to-wired LAN traffic is permitted.
Where:
<address> IP address.
</mask> Subnet mask in CIDR format. Specifies the number of bits in the mask.
delete ip filter
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
delete ip filter <ip address>/<mask>
Deletes the specified address from the IP filter list.
If the list is empty, then all wireless-to-wired LAN traffic is permitted.
Where:
<address> IP address.
</mask> Subnet mask in CIDR format. Specifies the number of bits in the mask.
delete ip filter all
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
delete ip filter all
Deletes all addresses from the IP filter list.