HP ProCurve MSM310 Reference Guide

CLI commands
Config context
2-22
Parameters
<name> Location where the AP is installed.
snmp-server port
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server port <port number>
Sets the port the AP will use to respond to SNMP requests.
Parameters
<port number> SNMP port number. Range 1 - 65535.
snmp-server readonly
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server readonly <community>
Sets the read-only community string.
no snmp-server readonly
Deletes the read-only community string.
snmp-server readwrite
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server readwrite <community>
Sets the read-write community string.
no snmp-server readwrite
Deletes the read-write community string.
snmp-server trap
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server trap
Enables support for SNMP traps.
no snmp-server trap
Disables support for SNMP traps.
snmp-server trap community
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server trap community <str>
Sets the password required by the remote host that will receive the trap.
no snmp-server trap community
Deletes the password required by the remote host that will receive the trap.

HP ProCurve MSM310 Specifications

General

Brand	HP
Model	ProCurve MSM310
Category	Wireless Access Point
Language	English