HP Proliant ML350 User Manual

Operations 28
4.
Remove the large redundant fan air baffle.
Remove the DIMM baffle
1. Power down the server (on page 24).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Open or remove the tower bezel" on page 25).
o Extend the server from the rack (on page 24).
3. Remove the access panel (on page 26).
4. Remove the large redundant fan air baffle, if installed ("Remove the large redundant fan air baffle" on
page 27).
5. Remove the DIMM baffle.

HP Proliant ML350 Specifications

General

Brand	HP
Model	Proliant ML350
Category	Server
Language	English