HP TouchSmart Elite 7320 User Manual

VESA Cover with Kensington Lock Bracket
The square, metal VESA cover is located in the middle, bottom of the computer. It is secured with 4
screws. The Kensington Lock bracket is permanently mounted to the VESA cover.
Figure 7-41 VESA cover with Kensington Lock bracket location
To remove the VESA cover:
1. Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 40).
2. Remove the rear cover (see
Rear Cover on page 41).
3. Remove the system board cover (see
System Board Cover on page 60).
74 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis

HP TouchSmart Elite 7320 Specifications

General

Brand	HP
Model	TouchSmart Elite 7320
Category	Desktop
Language	English