Product information
Table D-1 Product information
Topic Location
HP Cool Tools Most HP Microsoft Windows workstations are preloaded
with additional software that is not automatically installed
during first boot. Additionally, a number of valuable tools on
your workstation are preinstalled that may enhance system
performance. To access or learn more about these
applications, choose one of the following options:
●
Click the HP Cool Tools icon on the desktop, or
●
Open the HP Cool Tools folder by selecting Start >
All Programs > HP Cool Tools.
To learn more about these applications, click HP Cool
Tools—Learn More.
To install or launch the applications, click the appropriate
application icon.
Regulatory information Refer to the Safety & Regulatory Information guide for
product Class information. You can also refer to the label on
the workstation chassis.
Accessories For complete and current information on supported
accessories and components, see
http://www.hp.com/go/
workstations.
System board A diagram of the system board is located on the inside of
the side access panel. Also, additional information is located
in the Maintenance and Service Guide on the Web at
http://www.hp.com/support/workstation_manuals/
Serial number and Certificate of
Authenticity (COA) labels (if
applicable)
Serial number labels are on the top panel, or on the side of
the unit at the rear, depending on the workstation model.
The COA label is generally located on the top or side panel
near the serial number label. Some workstations have this
label on the bottom of the unit.
Linux For information on running Linux on HP workstations, see
http://www.hp.com/linux/.
204 Appendix D Locating HP resources ENWW
To Next Page
Loading...
Need help?
General