l For details about the configuration items that support export and import in the iBMC and
BIOS configuration files exported from the iBMC, see "Configuration File Description"
in the Huawei Server Firmware Upgrade Guide.
NOTE
After the mainboard is replaced, the iBMC and BIOS configurations are restored to the default settings
of the new mainboard. You need to reconfigure the iBMC and BIOS according to the actual situation.
The default user name, password, and IP address of the server are listed in5.1 Default Information.
----End
7.43 Removing the flexible NIC
Remove the flexible NIC before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the 5288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the I/O module above the flexible NIC. For details, see 7.19 Removing the Riser
Card.
Step 8 Remove the cables from the flexible NIC.
Step 9 Loosen the screws on the flexible NIC using a Phillips screwdriver. See step (1) in Figure
7-91.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 207
To Next Page
Loading...
Need help?
General