Version 2.1 (May 2016) 48
6.7. Configure DMZ
After DMZ is enabled, the computer that is configured as a DMZ host is exposed to the
Internet. For example, when building a server, you can configure the computer providing
external services as a DMZ host, which helps protect other computers on the home
network.
1. Log in to the web management page.
2. Choose Internet tab.
3. In the navigation tree, choose Network Security.
4. Select the DMZ configuration page.
5. In Host address, select the device that you want to act as a DMZ host, or click Add
device to add a new DMZ host.
6. Set Enable DMZ to enable the capability.
7. Click Save.
Picture 6-17 DMZ
6.8. Configure Application Filter
To enable the application filter function on a specified computer, you can block network
attacks from applications to the specified computer.
1. Log in to the web management page.
2. Choose Internet tab.
3. In the navigation tree, choose Network Security.
4. Select the Application Filter configuration page.
5. Click New application filter.
To Next Page
Loading...
Need help?
General
