Version 2.1 (May 2016) 72
Reference Operations 11.
11.1. Setting Dial-Up Connection Parameters
When the HA35 works in Bridge mode you need to perform this operation. Otherwise you
do not need to perform this operation.
Before setting dial-up connection parameters, verify that the HA35 is correctly connected to
your computer and you have the dial-up connection account name and password provided
by your Internet service provider (ISP). This section demonstrates how to set up a Point-to-
Point Protocol over Ethernet (PPPoE) connection on Windows.
On Windows 7
1. Choose Start > Control Panel > Network and Internet > Network and Sharing
Center.
Picture 11-1 network and sharing center
2. Under Change your networking settings, click Set up a new connection or network.
Picture 11-2 change your networking settings
3. In the Set Up a Connection or Network window, select Connect to the Internet and
click Next.
To Next Page
Loading...
Need help?
General
