Hypertherm HyPerformance HPR400XD Auto Gas User Manual

InstallatIon
3-16 HPR400XD Auto Gas – 806160
Placement of the cooler
• Placethecoolerinanareathatisfreeofexcessivemoisture,hasproperventilation,andisrelativelyclean.Allow
1 m (3 ft) of space on all sides of the power supply for ventilation and service.
• Coolingairisdrawninthroughthefrontpanelandisexhaustedthroughtherearoftheunitbyacoolingfan.Do
not place any filter device over the air intake locations, which reduces cooling efficiency and VOIDS
THE WARRANTY.
• Donotplacethecooleronaninclinegreaterthan10°topreventitfromtoppling.
C

Hypertherm HyPerformance HPR400XD Auto Gas Specifications

General

Brand	Hypertherm
Model	HyPerformance HPR400XD Auto Gas
Category	Welding System
Language	English