Hypertherm Powermax105 User Manual

Hand TorcH SeTup
Powermax105 Operator Manual 4-7
Connecting the torch lead
The Powermax105 is equipped with FastConnect
TM
, a quick-disconnect system for connecting and disconnecting
handheld and machine torch leads. When connecting or disconnecting a torch, first turn OFF the system. To connect
the torch, push the connector into the receptacle on the front of the power supply.
To remove the torch, press the red button on the connector and pull the connector out of the receptacle.
Red button

Hypertherm Powermax105 Specifications

General

Brand	Hypertherm
Model	Powermax105
Category	Welding System
Language	English