2
DRIVING YOUR HYUNDAI
5
STARTING
!
!
C050A01A-AAT
WARNING:
Never run the engine in a closed or
poorly ventilated area any longer
than is needed to move your car in
or out of the area. The carbon mon-
oxide gas emitted is odorless and
can cause serious injury or death.
LOCK
C050B01A-GAT
Normal Conditions:
The Starting Procedure:
1. Insert key, and fasten the seat belt.
2. Depress the clutch pedal fully and
place the gearshift lever (manual
transaxle) in neutral or the selector
lever (automatic transaxle) in "P"
(park) position.
3. After turning the ignition key to the
"ON" position, make certain all warn-
ing lights and gauges are functioning
properly before starting the engine.
WARNING:
Be sure that the clutch is fully de-
pressed when starting a manual
transaxle vehicle. Otherwise, there
is the potential to cause damage to
the vehicle or injury to someone
inside or outside the vehicle as a
result of the forward or backward
movement of the vehicle that will
occur if the clutch is not depressed
when the vehicle is started.
4. Turn the ignition key to the "Start"
position and release it when the en-
gine starts.
C050A01E
ON
START
OPERATING THE MANUAL
TRANSAXLE
C070A01GK-AAT
Your Hyundai's manual transaxle has a
conventional shift pattern. This shift
pattern is imprinted on the shift knob.
The transaxle is fully synchronized in
all forward gears so shifting to either a
higher or a lower gear is easily accom-
plished.
HGK3023
Type A Type B
gkflgene-2.p65 6/18/2007, 11:59 AM5
To Next Page
Loading...
Need help?
General
