1
CONTROLS AND EQUIPMENT
3
RUNNING IN YOUR NEW
HYUNDAI
B020A01S-EAT
The longevity and performance of the
vehicle are greatly affected by the care
exercised during the first 1,000 miles
of motoring. Because of modern manu-
facturing techniques, rigid guidelines
regarding maximum road speeds have
become unnecessary. However, cer-
tain precautions should be observed in
order to obtain the best possible per-
formance and useful life from the ve-
hicle.
1) Do not race the engine without a
load (i.e revving the engine in neu-
tral).
2) During the first 500 miles the maxi-
mum engine speed should be re-
stricted to 3,000 rpm and gradually
increased thereafter.
3) Avoid prolonged constant speed
operation. The internal components
of the engine will become more
quickly run in if the operation speed
is varied during the running in pe-
riod.
4) Never allow the engine to labour.
Use the gearbox freely and avoid
large throttle openings when the
engine speed is below 1,500 rpm.
BEFORE ENTERING THE
VEHICLE
AFTER ENTERING THE
VEHICLE
YB020A1-E
o Ensure that all windows, mirrors
and lamps are clean.
o Check condition of all tyres.
o Ensure that no fluid leaks are evi-
dent.
o Ensure that the area around the
vehicle is clear before driving off.
YB020B1-E
o Ensure that all occupants fasten
and correctly adjust seat belts.
o Ensure that seat and head restraint
positions are adjusted for optimum
safety, control and comfort.
o Adjust interior and exterior rear view
mirrors.
o Verify correct operation of lamps,
horn and other electrical equipment.
o Ensure that warning lamps illumi-
nate when ignition is turned on.
NOTE:
Fluid levels such as engine oil, en-
gine coolant, brake and windscreen
washer fluid should be checked
daily or at each refuelling, which-
ever occurs sooner.
To Next Page
Loading...
Need help?
General
