1
FEATURES OF YOUR HYUNDAI
12
POWER WINDOW
B050A03GK-AAT
The power windows operate only when
the ignition key is in the "ON" position.
The main switches are located on the
driver's arm rest and control the front
windows on the respective sides of the
vehicle. The windows may be opened
by depressing the front portion of the
switch. To stop at the desired opening,
release the switch. The window may be
closed by pulling the front portion of the
switch. To open the window on the
driver's side, press the switch(1) half-
way down. The window moves as long
as the switch is operated. To fully open
the driver's window automatically, press
the switch fully down. In automatic
operation, the window will fully open
even if you let go of the switch.
HGK2015
(2)
2. Remove the old battery from the
case and note the polarity. Make
sure the polarity of the new battery
is the same (+side facing up), then
insert it in the transmitter.
3. Installation is the reverse order of
disassembly.
Battery
OGK016121
NOTE:
Install a new battery within 30 sec-
onds after removing the old one. If
installing a new battery takes more
than 30 seconds, take the following
steps.
1) Turn the ignition key to the "ACC"
position.
2) Make sure that the turn signal
lights blink once by pushing the
"LOCK" or "UNLOCK" button on
the transmitter.
(1)
To Next Page
Loading...
Need help?
General
