1
CONTROLS AND EQUIPMENT
52
Volt Gauge
It shows moment volt change and
makes for diver correspond to low volt
situation.
B330C03GK
MULTI FUNCTION SWITCH
SB220A1-E
Turn Signal Operation
To signal an intention to turn right, the
switch lever should be pressed down.
To signal an intention to turn left, the
switch lever should be pushed upwards.
In both instances, the turn signal lights
and the instrument cluster warning light
will flash. Upon completion of the ma-
noeuvre, the lever will, under normal
circumstances, return to the "OFF"
position. However, if the manoeuvre
involved only a small movement of the
steering wheel, the signal may need to
be cancelled manually. If either turn
signal indicator flashes more rapidly
than normal or refuses to flash at all, a
malfunction of the turn signal system
may exist.
SB220B1-E
Lane Change Signal
To indicate an intention to change lanes,
moving the lever slightly towards the
direction of the relevant turn signal will
cause the turn signal lights to flash.
When the lever is released, it will return
to the "OFF" position.
HGK2079-E
To Next Page
Loading...
Need help?
General
