1
FEATURES OF YOUR HYUNDAI
44
B260D01A-AAT
Turn Signal Indicator
Lights
The blinking green arrows on the in-
strument panel show the direction indi-
cated by the turn signals. If the arrow
comes on but does not blink, blinks
more rapidly than normal, or does not
illuminate at all, a malfunction in the
turn signal system is indicated. Your
dealer should be consulted for repairs.
WARNING AND INDICATOR LIGHTS
B265C01LZ-AAT
Electronic Stability
Program Indicator Lights
(If installed)
The electronic stability program indi-
cators change operation according to
the ignition switch position and whether
the system is in operation or not.
They will illuminate when the ignition
key is turned to the "ON" position, but
should go out after three seconds. If
the ESP or ESP-OFF indicator stays
on, take your car to your authorized
Hyundai dealer and have the system
checked. See section 2 for more infor-
mation about the ESP.
B260U01TB-GAT
Immobilizer Warning
Light (If Installed)
This indicator light comes on for some
seconds after the ignition key is turned
to the "ON" position. At this time, you
can start the engine. The light goes out
after the engine is running. In case this
light goes out before you start the
engine, you must turn to the "LOCK"
position and restart the engine. In case
this light blinks for five seconds when
the ignition key is turned to "ON" posi-
tion, this indicates that the immobilizer
system is out of order. At this time,
refer to the explanation of the Limp
home procedure(See page 1-6) or con-
sult to the Hyundai dealer.
To Next Page
Loading...
Need help?
General
