2
DRIVING YOUR HYUNDAI
5
SC090D1-F
To Remove the Ignition Key
1. Turn the ignition key to the "ACC"
position.
2. Simultaneously push and turn the
ignition key counterclockwise from
the "ACC" position to the "LOCK"
position.
3. The key can be removed in the
"LOCK" position.
LOCK
C070C01E
ACC
ON
START
STARTING
SC060A1-E
Starting The Engine
1. Ensure that the gearshift lever is in
neutral and that the clutch pedal is
held depressed (manual transaxle)
or the selector lever is at the "P"
position (automatic transaxle ve-
hicle).
2. Turn the ignition key to and hold at
the "START" position until the en-
gine starts. When the engine has
started, release the key.
NOTE:
Do not operate the starter for more
than 15 seconds continuously or con-
tinue to operate the starter after the
engine has started to avoid damag-
ing the starter motor. If the engine
makes a false start, allow it and the
starter motor to come to rest before
attempting to start the engine again.
Never attempt to start the engine with
the transaxle in gear. Do not depress
the accelerator pedal whilst starting
the engine. Allow the engine to idle
for 20 seconds or so before driving
the vehicle.
CAUTION:
Do not leave the vehicle unattended
whilst idling. Never allow the vehicle
to idle or warm up in a confined
space (ie garage) longer than is nec-
essary to move the vehicle into an
open area.
!
C050A01E
To Next Page
Loading...
Need help?
General
