Appendix A. Technical specications
Enclosure dimensions
Table 13. Model 106 enclosure dimensions
Specication Metric units Imperial units
Height (including top cover) 176.4 mm 6.94 in
Width (excluding ears and rails) 441 mm 17.36 in
Depth (including handles,
excluding cables)
1,139 mm 44.84 in
Enclosure weights
Table 14. Model 106 enclosure weights
CRU/component Metric units Imperial units
Storage enclosure (empty) 36 kg 79.4 lb
Disk drive carrier (3.5” LFF disks
or 2.5" SFF disk with LFF
adapter)
Up to 0.8 kg Up to 1.8 lb
Power Supply Unit (PSU) 1.45 kg 3.2 lb
System fan module 0.7 kg 1.5 lb
IOM/EBOD expander module 0.8 kg 1.8 lb
IOM/EBOD expander module fan
module
0.345 kg 0.8 lb
HS Expander module 0.1 kg 0.2 lb
JBOD/EBOD enclosure (fully
populated with 106 drives:
maximum weight)
145.6 kg 321 lb
Note:
1. Weights shown are nominal, and subject to variances. Disk drive module weights vary by type of disk
used.
2. Rail kit adds approximately 6.75 kg (14.9 lb) to the aggregate enclosure weight. The CMA adds 0.91 kg
(2.0 lb) to aggregate enclosure weight.
3. Weights may vary due to number and type of disks, number of IOMs, and differing calibrations
between scales.
©
Copyright IBM Corp. 2018, 2020 83
To Next Page
Loading...
Need help?
General
