Adding and removing drives 7-13
4.
Insert the frame into the system unit as in the following
figure.
a.
Align the frame with the notch.
b.
Pivot the frame toward the system unit until the
tab clicks into place.
5.
Connect the signal and power cables to the drives.
Removing drives
To remove a drive from a specific bay, reverse the steps for
installing a drive in that bay.
B
A
v65xahb.book : chap-7.fm Page 13 Friday, January 16, 1998 4:27 PM
To Next Page
Loading...
Need help?
General