IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
9211 Gateway device detected a bus protocol error
Use the gateway device service documentation to analyze the problem.
FCGATE
FCIOA
FI00871
ANYFC
FCCABLE
FI00872
DEVTERM
9300 Tape unit failure FI00871
9301 Tape device failure, redundancy lost
The tape unit detected a hardware failure that does not prevent the tape
unit from completing the current operation.
FI00871
9302 Tape device failure or media error
The tape unit detected a failure that may be caused by a hardware failure
or a media error.
Refer to the tape unit service information for possible information on
diagnositic tests that can be run to isolate between hardware and media
failures.
MH7TMED
FI00871
9303 Gateway device failure
Use the gateway device service documenation to analyze the problem.
FCGATE
9310 Licensed Internal Code for the tape unit is not correct FI00130
FI00871
9320 Tape device Licensed Internal Code failure FI00130
FI00871
9321 Gateway device Licensed Internal Code error
Use the gateway device service documenation to analyze the problem.
FCCODE
9350 Tape unit detected a read or write error on tape medium
A permanent read or write error occurred. Clean the tape unit and retry
the operation.
If cleaning the tape unit does not correct the problem, exchange the tape
media.
MH7TMED
UH7CLN
FI00871
9351 Tape with excessive error rate was mounted in tape device.
The tape unit detected that the mounted tape cartridge has a history of
excessive read and write errors. It is recommended that you exchange the
tape cartridge.
MH7TMED
UH7CLN
FI00871
9355 The data format is incorrect; the tape cannot be read
The tape unit has detected that the data format on the tape media is not
supported.
Clean the tape unit and retry the operation.
If the operation continues to fail, use a different tape cartridge.
UH7USER
MH7TMED
UH7CLN
FI00871
9500 I/O processor Licensed Internal Code error
If the system is operational, take a dump of the I/O processor data. For
more information, see the iSeries Service Functions information or ask your
next level of support for assistance.
FI00130
63A0
System Reference Codes 179

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English