Storage subsystem and controller information record
Table 23 provides a data sheet for recording storage subsystem names, management types, Ethernet
hardware addresses, and IP addresses. Make a copy of this table and complete the information for your
storage subsystems and controllers. Use the information to set up the BOOTP table for the network server
and the host or Domain Name System (DNS) table. The information is also helpful if you add storage
subsystems after initial installation. Refer to your DS Storage Manager documentation for detailed
instructions about how to obtain the information. For a sample information record, see Table 24 on page
141.
Table 23. Storage subsystem and controller information record
Storage
subsystem name
Management
method
Controllers-Ethernet and IP addresses, and host
name
Host-IP address and host
name
140 IBM System Storage DCS3700: Installation, User, and Maintenance Guide