IBM System Storage DCS3700 User Manual

The vertical distance between mounting holes must consist of sets of three holes spaced (from bottom
to top) 15.9 mm (0.625 in.), 15.9 mm (0.625 in.), and 12.67 mm (0.5 in.) on center (making each three
hole set of vertical hole spacing 44.45 mm (1.75 in.) apart on center). The front and rear mounting
flanges in the rack or cabinet must be 719 mm (28.3 in.) apart and the internal width bounded by the
mounting flanges at least 494 mm (19.45 in.), for the IBM Storage System or eServer
™
rails to fit in
your rack or cabinet (see Figure 91 on page 149).
Top Front of Rack
EIA Hole Spacing
6.75 mm min.
15.9 mm
15.9 mm
15.9 mm
15.9 mm
12.7 mm
12.7 mm
Hole Diameter =
7.1 +/- 0.1 mm
450 +/- 0.75 mm
Rack Front Opening
465 +/- 0.8 mm
Rack Mounting Holes Center-to-Center
6.75 mm min.
15.9 mm
15.9 mm
12.7 mm
15.9 mm
15.9 mm
12.7 mm
nonibm_topfront
Figure 92. Rack specifications dimensions, top front view
150 IBM System Storage DCS3700: Installation, User, and Maintenance Guide

IBM System Storage DCS3700 Specifications

General

Brand	IBM
Model	System Storage DCS3700
Category	Storage
Language	English