Using Power Management
Standby Mode
In standby mode, the LCD (and external monitor output) turns off.
The computer immediately resumes normal operation when you
press any key or use any pointing device.
To enter standby mode, press Fn+F3. You can also set the standby
timer using the ThinkPad Features program. (To return to normal
operation, press any key.)
Suspend Modes
The computer provides the following two types of suspend modes for
you to save power:
Suspend mode
RediSafe suspend mode
To enter suspend mode, do one of the following:
Press Fn+F4.
Close the LCD of the computer.
Open the keyboard of the computer.
Set the suspend timer using the ThinkPad Features program.
When the computer is entering suspend mode, the suspend indicator
lamp (
) blinks first, and then stays on (in green) with a beep.
The power indicator lamp (
) turns off.
To return to normal operation, press the Fn key.
Suspend mode
In suspend mode, all tasks are stopped and stored in memory to
save power. When the computer resumes normal operation, the
tasks are automatically restored.
94
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To Next Page
Loading...
Need help?
General