Advanced Information for PC Cards
OS/2 PCMCIA Storage API Device Driver
OS/2
This device driver provides a communication function between PC Card
Director or the mount utility and the OS/2 PCMCIA ATA card device driver.
As a result, a utility in the upper layer can get the drive letter or partition
information for the PCMCIA storage card.
The following is a line from the CONFIG.SYS file that describes the Storage
API device driver:
DEVICE =[drive:][directory]PCMSSDIF.SYS
Flash Card Memory Technology Driver
This driver is used to read and write to a Flash card. It is used by the DOS
storage card device driver (PAWATASF.SYS) and OS2 Flash card driver
(PCM2FLSH.SYS).
The following is a line from the CONFIG.SYS file that describes the Flash
Card Memory Technology driver, according to the operating system:
For OS/2:
DEVICE =[drive:] [directory] FLSH2MTD.SYS
Memory Technology driver
DEVICE =[drive:] [directory] PCM2FLSH.SYS
Storage card device driver
For DOS and Windows:
DEVICE=[drive:] [directory] IBMDOSCS.SYS
Card Services
DEVICE=[drive:] [directory] IBMDSCSE.SYS
Enhanced Card Services
DEVICE=[drive:] [directory] FLSHDMTD.SYS
Memory Technology driver
DEVICE=[drive:] [directory] PAWATASF.SYS
ATA SRAM Flash card device driver
Appendix B. Advanced Information for PC Cards 287
To Next Page
Loading...
Need help?
General