Icom GM600 User Manual

30
8
DSC OPERATION
D Entering Group ID
q Push [MENU].
w Select “Group ID,” then push [ENT].
(Settings > DSC > Group ID)
e Push [Add]
.
Push
r Enter a 9 digit Group ID.
+
Rotate
Push
TIP: You must set the rst digit for a
Group ID to ‘0.’
• The rst digit must be set to between ‘1’
and ‘9’ for an Individual ID.
• The rst two digits must be set to ‘0’ for
any Coast station ID.
t After entering all 9 digits, select
“Next,” and then push [ENT].
y Enter the desired ID name.
+
Rotate
Push
• See page 18 for text entry details.
u After entering, select “Finish,” and
then push [ENT].
Push
• The entered Group ID and name
are added to the ID list.
i Push [MENU] to return to the Main
screen.
D Deleting an entered ID
q Push [MENU].
w Select “Individual ID” or “Group ID,”
then push [ENT].
( Settings > DSC > Individual ID)
(Settings > DSC > Group ID)
e Rotate [CH/ENT] to select the ID to
delete.
r Push [Delete]
.
Push
t Push [OK] .
Push
• After deleting, returns to the ID list screen.
y Push [MENU] to return to the Main
screen.
■ DSC address ID (Continued)

Icom GM600 Specifications

General

Brand	Icom
Model	GM600
Category	Transceiver
Language	English