56
8
DSC OPERATION
■ Sending a Non-Distress calls (Continued)
D Sending a Test call
Testing on the exclusive DSC distress
and safety calling channels should be
avoided as much as possible by using
other methods.
Normally the test call would require no
further communications between the
two stations involved.
q Push [Compose Non-Distress]
to display the Compose Non-Distress
screen.
• To display the screen from the Menu
screen:
([MENU] >
Compose Non-Distress
)
w Select “Message Type,” then
push [ENT].
e Select “Test Call.”
+
Push
Rotate
r Select “Address,” then push [ENT].
t Select the desired Individual
address, or “Manual Input.”
(Example: STATION1)
+
Push
Rotate
When you select “Manual Input” in step
t, push the keypad to manually enter
the desired Individual ID. (p. 29)
y Push [Call]
to s
end the Test call.
Push
u After sending, the following screen is
displayed.
i When the acknowledgment is
received:
• An alarm sounds.
• The following screen is displayed.
To Next Page
Loading...
Need help?
General
