To Next Page

To Previous Page

MENU ITEMS

■ Radio settings

D Scan Type

(Settings > Radio > Scan Type)

Selects the desired Scan type to locate signals. (p. 26)

• Normal Scan: Sequentially searches all Favorite channels.

• Priority Scan: Sequentially searches all Favorite channels,

while also monitoring Channel 16. (Default)

D Scan Timer

(Settings > Radio > Scan Timer)

Turns the Scan Resume timer ON or OFF.

• ON: When a signal is detected on a channel, the scan

pauses for 5 seconds, and then resumes.

If the signal disappears in less than 5 seconds, the

scan immediately resumes.

• OFF: When a signal is detected on a channel, the scan

pauses until the signal disappears, and then

resumes. (Default)

D Dual/Tri-Watch

(Settings > Radio > Dual/Tri-Watch)

Selects the desired watch type. (p. 28)

• Dualwatch: The transceiver monitors Channel 16, while

listening or talking on another channel.

(Default)

• Tri-watch: The transceiver monitors Channel 16 and

the Call channel, while listening or talking on

another channel.

D Call Channel

(Settings > Radio > Call Channel)

You can set the Call channel with your most often-used

channel for quick recall. (p. 14) (Default: Channel 16)

Icom GM600 User Manual

Other manuals for Icom GM600