93
10
CONNECTIONS AND MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
IEC61162-1 IN (+)
IEC61162-1 IN (–)
IEC61162-1 OUT (+)
IEC61162-1 OUT (–)
BAM OUT (–)
BAM OUT (+)
BAM IN (–)
BAM IN (+)
CAUTION: DO NOT transmit without an antenna.
y ANTENNA CONNECTOR (to receive on Channel 70)
u ANTENNA CONNECTOR
Connects to a marine VHF antenna with a PL-259
connector.
t IEC61162-1 CONNECTOR
Use the supplied accessory connector for connections. See
page 95 for details.
➥ Connects to IEC61162-1 Out lines of a PC or
IEC61162-1 sentence format DSC or DSE compatible
navigation equipment, to receive position data from
other ships.
➥ Connects to IEC61162-1 In lines of a GPS receiver for
position data.
• A GPS receiver compatible with IEC61162-1 format RMC,
GGA, GNS, or GLL and VTG sentences is required. Ask
your dealer about suitable GPS receivers.
➥ Connects to BAM In/Out lines of the CAM system to
send the transceiver’s BAM information to the CAM
system.
Remote alarm input terminal
When this terminal shorts to the GND terminal, the
transceiver sends the Distress call.
This terminal can be used as an external distress switch.
D IEC61162-1 In/Out linesʼ specications
PIN SPECIFICATIONS
IEC61162-1 OUT (+)
Output level: 5 V/40 mA maximum
(RS-422 balanced type)
IEC61162-1
OUT (–)
BAM OUT (+)
BAM OUT (–)
IEC61162-1
IN (+)
Input level: Less than 2 mA
(at 2 V applied)
IEC61162-1
IN (–)
BAM IN (+)
BAM IN (–)
Remote alarm output
Remote alarm input
GND
NC
Programming
GND
NC
To Next Page
Loading...
Need help?
General
